SAE 67  American standard – SAE  Cu Pb15 Sn (Cu Sn7 Pb15-C), CC496K

SAE 68B  American standard – SAE  ~ SS 5716-15 (Cu Al10 Fe5 Ni5)

SAE 94, SAE 794  American standard – SAE

Cu Pb20 Sn 5 ,  (Cu Sn5 Pb20-V), CC497K

LM’s comparison list between different

norms from Copper alloys

Please read below on the wished for trade-name in the left hand column, and get it translated into LM-language on the right-hand

column. The right hand column with our name is either identical in composition or a fully replaceable alloy with only minor

differences. The column in the middle states the norm and its country of origin.

With no marks in front of LM’s alloy = alloy is identical, with this sign “~” = alloy is very similar, fully replaceable.

Product name Country of origin LM’s trade name by or order/inquiry

3A  American standard – ASTM  SS 5640-15 (Cu Pb10 Sn10), CC495K

4A  American standard – ASTM  SS 5204-15 (Cu Sn5 Pb5 Zn5), CC491K

 

電真空器件

電真空器件主要是高頻和超高頻發射管、波導管、磁控管等，它們需 要高純度無氧銅和彌散強化無氧銅。

印刷電路

銅印刷電路，是把銅箔作為表面，粘貼在作為支撐的塑料板上；用照相的辦法把電路布線圖印制在銅版上；通過浸蝕把多余的部分去掉而留下相互連接的電路。然后，在印刷線路板上與外部的連接處沖孔，把分立元件的接頭或其它部分的終端插入，焊接在這個口路上，這樣一個完整的線路便組裝完成了。如果采用浸鍍法，所有接頭的焊接可以一次完成。這樣，對于那些需要精細布置電路的場合，如無線電、電視機，計算機等，采用印刷電路可以節省大量布線和固定回路的勞動；因而得到廣泛應用，需要消費大量的銅箔。此外，在電路的連接中還需用各種價格低廉、熔點低、流動性好的銅基釬焊材料。