Black oxidation is a surface treatment method of chemical reaction on the surface of INA bearing steel. Black oxide layer is formed when parts are immersed in alkaline brine solution at working temperature of about 150 degrees Celsius.

黑色氧化物的好處bi須通過單獨的應用來判斷，但這種處理沒有任何危害。它已成功地應用于其余行業難以操作的INA軸承，如造紙機輥、機床和工業通風機。黑色氧化過程涉及許多參數。整個過程包括大約15個不同的浸漬步驟。在許多步驟中，化學成分、濃度、溫度、浸漬時間和流體特性都可以調整。

The benefits of black oxide Bi must be judged by its application alone, but there is no harm in this treatment. It has been successfully applied to INA bearings which are difficult to operate in other industries, such as paper mill rolls, machine tools and industrial ventilators. Black oxidation process involves many parameters. The whole process includes about 15 different impregnation steps. In many steps, chemical composition, concentration, temperature, impregnation time and fluid characteristics can be adjusted.

為了達到zui佳性能，建議內外環和輥均采用黑色氧化處理。黑色氧化可應用于大型風力機的所有軸承類型。近年來，圓柱滾子軸承和圓錐滾子軸承的到了成功的處理和使用。

In order to achieve the best performance of zui, black oxidation treatment is recommended for both inner and outer rings and rolls. Black oxidation can be applied to all bearing types of large wind turbines. In recent years, cylindrical roller bearings and tapered roller bearings have been successfully treated and used.

軸承座上中部和軸承座外側（朝向輥頭）注入的潤滑脂不能很好地進入軋機軸承，容易丟失，導致軸承在軋制過程中工作面油質bu良，導致軸承早期失效。

The lubricating grease injected into the middle part of the bearing seat and the outer side of the bearing seat (towards the roller head) can not enter the rolling mill bearing well and is easy to be lost, resulting in good oil Bu in the working face of the bearing during rolling process, leading to early failure of the bearing.

為此，對軸承座油路進行了改進，在INA軸承座內側（朝向輥體）增加了噴油嘴，提高了注脂效果。軸承潤滑良好。大多數軋鋼機現在使用潤滑脂潤滑。由于立磨的結構，使軸承在軋輥轉動時使用壽命延長。

For this reason, the oil circuit of bearing seat was improved, and the oil injector was added to the inner side of INA bearing seat (towards the roll body) to improve the grease injection effect. The bearings are well lubricated. Most rolling mills now use grease lubrication. Because of the structure of the vertical mill, the service life of the bearing is prolonged when the roll rotates.

根據主機部件的要求注入規定的潤滑脂或潤滑劑。

Inject the specified grease or lubricant according to the requirements of the main engine parts.

裝配大軸承及軸承與軸、座孔間隙大的產品時，bi須用油浴加熱軸承，油浴溫度約80℃。

When assembling large bearings and products with large clearance between bearings and axles and seat holes, Bi must use oil bath to heat bearings, and the oil bath temperature is about 80 C.

拆卸INA軸承時，bi須使用專用繪圖工具。嚴禁用鐵制工具直接敲打軸承。

When disassembling INA bearings, Bi must use special drawing tools. It is strictly forbidden to tap bearings directly with iron tools.

在裝配和拆卸軸承時，應避免滾動部件和保持架受力或變形。

When assembling and disassembling bearings, force or deformation of rolling parts and cages should be avoided.

文章來自：SKF軸承 www.wh-skf.com

Article from: SKF Bearing www.wh-skf.com

文章來自：INA軸承 www.ina-china.cn

Articles from: INA Bearing www.ina-China.cn

文章來自：NSK軸承 www.klbbearings.com

Article from: NSK Bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757

【溫馨提示】以上是鴻御（上海）國際貿易有限公司供應的滾針軸承--INA軸承-INA軸承HKH0810黑色氧化的處理方案及后期維護的詳細信息，歡迎您在驛路商務查看滾針軸承的新的價格、廠家、型號、圖片等信息。本頁所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，"驛路商務"對此不承擔任何保證責任。同時鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請積極舉報。[我要舉報]

• 下一產品：1794-IA8 羅克韋爾模塊
• 上一產品：三格化糞池生產廠_三格化糞池生產廠家_三格化糞池生產廠家哪