儀器儀表回收公司

 

聯系人：陳衛平/13549336060[手機/**]  QQ咨詢：742002535

 

聯系人：彭麗玲/13580718829             QQ咨詢：413962246

 

公司電話：0769-82134961

公司網站：http://www.jx5117.com

地址：廣東省東莞市塘廈鎮麗駿豪庭二期
 

公司主要經營儀器回收,回收儀器,回收萬用表,回收示波器,,回收,維修,出售,進口二手測試儀器?；厥諆x器：網絡,頻譜,手機綜測,示波器,萬用表,功率計,,頻率計,,LCR,測試儀等等！歡迎來電咨詢！

 

 

Keysight Technologies

Specifying Calibration Standards

and Kits for Keysight Vector

Network Analyzers

Application

 

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

 

Measurement errors

Systematic errors include impedance mismatch, system frequency response and leakage signals in the test setup. In most microwave measurements, systematic errors are the most significant source of measurement uncertainty. The source of these errors can be attributed to the signal separation scheme used.

Numerous publications are available on vector network analyzer (VNA) calibration techniques. References [1], [2], [3], [4], [5], [6], [7] and [8] are just some of the published work. Keysight Technologies, Inc. application notes: 1287-1, 1287-2 and 1287-3 also provide insights on VNAs and VNA error correction. It is recommended that a user be familiar with these calibration techniques and terminologies to get the maximum understanding from this application note.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

 

主要特性與技術指標 ?直流到18 GHz的頻率范圍

?執行完整雙端口校準的校準標準

?扭矩扳手符合正確的連接標準

?更改測試端口極性的適配器

?標準定義存儲于磁盤中，可下載到網絡分析儀

描述 

Keysight 85054D 經濟型機械校準套件包含精密的標準器件，用于通過 N 型接口表征是德網絡分析儀的系統誤差。此套件還包含可改變測試端口性別的適配器，以及用于正確連接的扭矩扳手。連接器量規可以單獨訂購。

 

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━